change language sk change language en
number of Items: 0 0,00 €

VOOPOO DRAG X 18650 Pod mod Black

Click to enlarge
VOOPOO DRAG X 18650 Pod mod
  • VOOPOO DRAG X 18650 Pod mod
  • VOOPOO DRAG X 18650 Pod mod
  • VOOPOO DRAG X 18650 Pod mod
  • VOOPOO DRAG X 18650 Pod mod
  • VOOPOO DRAG X 18650 Pod mod
  • VOOPOO DRAG X 18650 Pod mod
  • VOOPOO DRAG X 18650 Pod mod
  • VOOPOO DRAG X 18650 Pod mod
  • VOOPOO DRAG X 18650 Pod mod
  • VOOPOO DRAG X 18650 Pod mod
38,99 EUR32,22 EUR without VATks
select option:
38,99 €stock
38,99 €stock
38,99 €stock
38,99 €stock
barva:Blackodpor :
0,3 ohm
0,15 ohm
kapacita clearomizéru :
2,0 ml
způsob kouření :
DL - do plúc 

VOOPOO DRAG X 18650 Pod mod


VOOPOO presents a powerful pod mod in an elegant design. DRAG X combines a quality zinc alloy with leather, which gives it a unique look among other plastic or metal e-cigarettes. This powerful pod mod works on a single 18650 battery (not included). You have complete freedom in which battery to use, how strong and with what capacity. In addition, the battery can be replaced with a fully charged one at any time, or the battery can be charged directly in the device via the USB-C port.

Inside the mod is a new generation of GENE.TT chip, which offers extremely fast response and immediate heating of the coil, which is important for proper evaporation of e-liquid and a pleasant enjoyment of vaping. You will use a sufficiently large and clear display for control, which is full of information about the set power, measured resistance, output voltage, number of puffs and the remaining capacity of the battery. Newly, the DRAG X is also equipped with a unique SCORE mode, which records the point scores of your puffs according to the amount of vapor created.

In addition to the device, the package also includes a plastic pod with a volume of up to 4.5 ml. Pod serves not only as a tank for e-liquid, but also as a mouthpiece and at the same time a heating head is installed in it. It does not have to be screwed into the pod, you just need to slide it in. Two sub-ohm heating heads are included, both designed for direct lung vaping. While with the VM6 head and 0.15Ω resistance you can use almost all the power of the DRAG X pod mod, with the 0.3Ω head you will enjoy more comfortable DL vaping with medium wattage.


Package contents and parameters

1x DRAG X mod
1x DRAG X pod 2,0ml
1x heating head PnP-VM6 0.15Ω (60W-80W)
1x heating head PnP-VM1 0.3Ω (32W-40W)
1x USB-C cable
Package contents may change.
Dimensions: 95mm x 32.5mm x 28mm
Variable wattage: 5W-80W
Output voltage: 3.2V-4.2V
Supported modes: VW
Supported resistance: 0.1Ω-3Ω
Battery: 1x 18650 (at least 20A) - not included
Charging: USB-C port
Material: zinc alloy, PCTG


Pod mod

The powerful pod mod works on a single 18650 battery (not included). The battery is inserted into the device via the bottom door. You can charge it directly in the mod via the USB-C port. The body is made of zinc alloy and the panel is available in leather or carbon fiber. 





The DRAG X is controlled by color displays and three buttons. The device offers SMART and RBA modes, which you can easily switch between. The power can be set up to 80W and using the buttons you can easily lock the device or reset the puff counter. The new SCORE function scores points for each of your puffs and assigns ranks for a certain number of points.


Heating heads

DRAG X is compatible with a wide range of PnP heads, which offer different resistances and different recommended wattages. The package includes two heating heads, one VM6 with a resistance of 0.15Ω and the other VM1 with a resistance of 0.3Ω. Both are designed for direct lung vaping into the lungs. You simply slide the heating head into the pod, there is no need to screw it in any way.




To fill the plastic pod, it is necessary to slide it out of the battery and turn with the mouthpiece down. After opening the silicone cap, up to 4.5 ml of e-liquid can be filled in the pod.



Your inquiry VOOPOO DRAG X 18650 Pod mod

your name, surname:*
Your Email:*
Your phone:*
Your inquiry:*
Enter the code:* antispam
     more information

Post new comment

e-mail ( email is not published )
Your contribution   ( You can insert photos after posting )
     more information

Send to a friend

Your name
Your Email
Your friend's email
Copy the code antispam